Where the safe working load may be varied by the raising or lowering of the jib, a table indicating the SWL at the corresponding indication of the jib or corresponding radii of the load shall be attached with the jib-crane.The safe working load has to be specified by a competent person after testing and examination.“No lifting machine and no chain, rope or lifting tackle shall, except for the purpose of the test, be loaded beyond the safe working load which shall be plainly marked and duly entered in the prescribed register, and where this is not practicable, a table showing the safe working loads of every kind and size of lifting machine or chain, rope or lifting tackle in use shall be displayed in prominent positions on the premises”ĬLICK HERE FOR □ EOT CRANE SAFETY Rule 60 of the Gujarat Factories Rules 1963 Safe working load require that: “The maximum safe working load ( SWL) shall be plainly marked on every hoist or lift, and no-load greater than such load shall be carried thereon” Section 29(1)(b) of the same Act, prescribes as under: Section 28(1)(c) of the Factories Act, prescribes as under: It must be clearly marked on any lifting device (hoist, lifts, lifting machines, and lifting tackles). Safe Working Load (SWL) is the limiting safety factor to lift and carry any load safely.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |